Supported devices

The following devices have been tested and confirmed as working. If your device is unlisted but working, please open a pull request to update the list and add a fixture file (use python -m devtools.dump_devinfo to generate one).

[!NOTE] The hub attached Tapo buttons S200B and S200D do not currently support alerting when the button is pressed.

Kasa devices

Some newer Kasa devices require authentication. These are marked with [1] in the list below.
Hub-Connected Devices may work across TAPO/KASA branded hubs even if they don’t work across the native apps.

Plugs

• EP10

  • Hardware: 1.0 (US) / Firmware: 1.0.2

• EP25

  • Hardware: 2.6 (US) / Firmware: 1.0.1[1]

  • Hardware: 2.6 (US) / Firmware: 1.0.2[1]

• HS100

  • Hardware: 1.0 (UK) / Firmware: 1.2.6

  • Hardware: 4.1 (UK) / Firmware: 1.1.0[1]

  • Hardware: 1.0 (US) / Firmware: 1.2.5

  • Hardware: 2.0 (US) / Firmware: 1.5.6

• HS103

  • Hardware: 1.0 (US) / Firmware: 1.5.7

  • Hardware: 2.1 (US) / Firmware: 1.1.2

  • Hardware: 2.1 (US) / Firmware: 1.1.4

• HS105

  • Hardware: 1.0 (US) / Firmware: 1.5.6

• HS110

  • Hardware: 1.0 (EU) / Firmware: 1.2.5

  • Hardware: 4.0 (EU) / Firmware: 1.0.4

  • Hardware: 1.0 (US) / Firmware: 1.2.6

• KP100

  • Hardware: 3.0 (US) / Firmware: 1.0.1

• KP105

  • Hardware: 1.0 (UK) / Firmware: 1.0.5

  • Hardware: 1.0 (UK) / Firmware: 1.0.7

• KP115

  • Hardware: 1.0 (EU) / Firmware: 1.0.16

  • Hardware: 1.0 (US) / Firmware: 1.0.17

  • Hardware: 1.0 (US) / Firmware: 1.0.21

• KP125

  • Hardware: 1.0 (US) / Firmware: 1.0.6

• KP125M

  • Hardware: 1.0 (US) / Firmware: 1.1.3[1]

  • Hardware: 1.0 (US) / Firmware: 1.2.3[1]

• KP401

  • Hardware: 1.0 (US) / Firmware: 1.0.0

Power Strips

• EP40

  • Hardware: 1.0 (US) / Firmware: 1.0.2

• EP40M

  • Hardware: 1.0 (US) / Firmware: 1.1.0[1]

• HS107

  • Hardware: 1.0 (US) / Firmware: 1.0.8

• HS300

  • Hardware: 1.0 (US) / Firmware: 1.0.10

  • Hardware: 1.0 (US) / Firmware: 1.0.21

  • Hardware: 2.0 (US) / Firmware: 1.0.12

  • Hardware: 2.0 (US) / Firmware: 1.0.3

• KP200

  • Hardware: 3.0 (US) / Firmware: 1.0.3

• KP303

  • Hardware: 1.0 (UK) / Firmware: 1.0.3

  • Hardware: 2.0 (US) / Firmware: 1.0.3

  • Hardware: 2.0 (US) / Firmware: 1.0.9

• KP400

  • Hardware: 1.0 (US) / Firmware: 1.0.10

  • Hardware: 2.0 (US) / Firmware: 1.0.6

  • Hardware: 3.0 (US) / Firmware: 1.0.3

  • Hardware: 3.0 (US) / Firmware: 1.0.4

Wall Switches

• ES20M

  • Hardware: 1.0 (US) / Firmware: 1.0.11

  • Hardware: 1.0 (US) / Firmware: 1.0.8

• HS200

  • Hardware: 2.0 (US) / Firmware: 1.5.7

  • Hardware: 3.0 (US) / Firmware: 1.1.5

  • Hardware: 5.0 (US) / Firmware: 1.0.11

  • Hardware: 5.0 (US) / Firmware: 1.0.2

  • Hardware: 5.26 (US) / Firmware: 1.0.3[1]

• HS210

  • Hardware: 1.0 (US) / Firmware: 1.5.8

  • Hardware: 2.0 (US) / Firmware: 1.1.5

• HS220

  • Hardware: 1.0 (US) / Firmware: 1.5.7

  • Hardware: 2.0 (US) / Firmware: 1.0.3

  • Hardware: 3.26 (US) / Firmware: 1.0.1[1]

• KP405

  • Hardware: 1.0 (US) / Firmware: 1.0.5

  • Hardware: 1.0 (US) / Firmware: 1.0.6

• KS200M

  • Hardware: 1.0 (US) / Firmware: 1.0.10

  • Hardware: 1.0 (US) / Firmware: 1.0.11

  • Hardware: 1.0 (US) / Firmware: 1.0.12

  • Hardware: 1.0 (US) / Firmware: 1.0.8

• KS205

  • Hardware: 1.0 (US) / Firmware: 1.0.2[1]

  • Hardware: 1.0 (US) / Firmware: 1.1.0[1]

• KS220

  • Hardware: 1.0 (US) / Firmware: 1.0.13

• KS220M

  • Hardware: 1.0 (US) / Firmware: 1.0.4

• KS225

  • Hardware: 1.0 (US) / Firmware: 1.0.2[1]

  • Hardware: 1.0 (US) / Firmware: 1.1.0[1]

• KS230

  • Hardware: 1.0 (US) / Firmware: 1.0.14

• KS240

  • Hardware: 1.0 (US) / Firmware: 1.0.4[1]

  • Hardware: 1.0 (US) / Firmware: 1.0.5[1]

  • Hardware: 1.0 (US) / Firmware: 1.0.7[1]

Bulbs

• KL110

  • Hardware: 1.0 (US) / Firmware: 1.8.11

• KL120

  • Hardware: 1.0 (US) / Firmware: 1.8.11

  • Hardware: 1.0 (US) / Firmware: 1.8.6

• KL125

  • Hardware: 1.20 (US) / Firmware: 1.0.5

  • Hardware: 2.0 (US) / Firmware: 1.0.7

  • Hardware: 4.0 (US) / Firmware: 1.0.5

• KL130

  • Hardware: 1.0 (EU) / Firmware: 1.8.8

  • Hardware: 1.0 (US) / Firmware: 1.8.11

• KL135

  • Hardware: 1.0 (US) / Firmware: 1.0.15

  • Hardware: 1.0 (US) / Firmware: 1.0.6

• KL50

  • Hardware: 1.0 (US) / Firmware: 1.1.13

• KL60

  • Hardware: 1.0 (UN) / Firmware: 1.1.4

  • Hardware: 1.0 (US) / Firmware: 1.1.13

• LB110

  • Hardware: 1.0 (US) / Firmware: 1.8.11

Light Strips

• KL400L5

  • Hardware: 1.0 (US) / Firmware: 1.0.5

  • Hardware: 1.0 (US) / Firmware: 1.0.8

• KL420L5

  • Hardware: 1.0 (US) / Firmware: 1.0.2

• KL430

  • Hardware: 2.0 (UN) / Firmware: 1.0.8

  • Hardware: 1.0 (US) / Firmware: 1.0.10

  • Hardware: 2.0 (US) / Firmware: 1.0.11

  • Hardware: 2.0 (US) / Firmware: 1.0.8

  • Hardware: 2.0 (US) / Firmware: 1.0.9

Hubs

• KH100

  • Hardware: 1.0 (EU) / Firmware: 1.2.3[1]

  • Hardware: 1.0 (EU) / Firmware: 1.5.12[1]

  • Hardware: 1.0 (UK) / Firmware: 1.5.6[1]

Hub-Connected Devices

• KE100

  • Hardware: 1.0 (EU) / Firmware: 2.4.0[1]

  • Hardware: 1.0 (EU) / Firmware: 2.8.0[1]

  • Hardware: 1.0 (UK) / Firmware: 2.8.0[1]

Tapo devices

All Tapo devices require authentication.
Hub-Connected Devices may work across TAPO/KASA branded hubs even if they don’t work across the native apps.

Plugs

• P100

  • Hardware: 1.0.0 (US) / Firmware: 1.1.3

  • Hardware: 1.0.0 (US) / Firmware: 1.3.7

  • Hardware: 1.0.0 (US) / Firmware: 1.4.0

• P110

  • Hardware: 1.0 (EU) / Firmware: 1.0.7

  • Hardware: 1.0 (EU) / Firmware: 1.2.3

  • Hardware: 1.0 (UK) / Firmware: 1.3.0

• P110M

  • Hardware: 1.0 (AU) / Firmware: 1.2.3

  • Hardware: 1.0 (EU) / Firmware: 1.2.3

• P115

  • Hardware: 1.0 (EU) / Firmware: 1.2.3

• P125M

  • Hardware: 1.0 (US) / Firmware: 1.1.0

• P135

  • Hardware: 1.0 (US) / Firmware: 1.0.5

• TP15

  • Hardware: 1.0 (US) / Firmware: 1.0.3

Power Strips

• P300

  • Hardware: 1.0 (EU) / Firmware: 1.0.13

  • Hardware: 1.0 (EU) / Firmware: 1.0.15

  • Hardware: 1.0 (EU) / Firmware: 1.0.7

• P304M

  • Hardware: 1.0 (UK) / Firmware: 1.0.3

• TP25

  • Hardware: 1.0 (US) / Firmware: 1.0.2

Wall Switches

• S500D

  • Hardware: 1.0 (US) / Firmware: 1.0.5

• S505

  • Hardware: 1.0 (US) / Firmware: 1.0.2

• S505D

  • Hardware: 1.0 (US) / Firmware: 1.1.0

Bulbs

• L510B

  • Hardware: 3.0 (EU) / Firmware: 1.0.5

• L510E

  • Hardware: 3.0 (US) / Firmware: 1.0.5

  • Hardware: 3.0 (US) / Firmware: 1.1.2

• L530E

  • Hardware: 3.0 (EU) / Firmware: 1.0.6

  • Hardware: 3.0 (EU) / Firmware: 1.1.0

  • Hardware: 3.0 (EU) / Firmware: 1.1.6

  • Hardware: 2.0 (US) / Firmware: 1.1.0

• L630

  • Hardware: 1.0 (EU) / Firmware: 1.1.2

Light Strips

• L900-10

  • Hardware: 1.0 (EU) / Firmware: 1.0.17

  • Hardware: 1.0 (US) / Firmware: 1.0.11

• L900-5

  • Hardware: 1.0 (EU) / Firmware: 1.0.17

  • Hardware: 1.0 (EU) / Firmware: 1.1.0

• L920-5

  • Hardware: 1.0 (EU) / Firmware: 1.0.7

  • Hardware: 1.0 (EU) / Firmware: 1.1.3

  • Hardware: 1.0 (US) / Firmware: 1.1.0

  • Hardware: 1.0 (US) / Firmware: 1.1.3

• L930-5

  • Hardware: 1.0 (US) / Firmware: 1.1.2

Cameras

• C210

  • Hardware: 2.0 (EU) / Firmware: 1.4.2

  • Hardware: 2.0 (EU) / Firmware: 1.4.3

• TC65

  • Hardware: 1.0 / Firmware: 1.3.9

Hubs

• H100

  • Hardware: 1.0 (EU) / Firmware: 1.2.3

  • Hardware: 1.0 (EU) / Firmware: 1.5.10

  • Hardware: 1.0 (EU) / Firmware: 1.5.5

• H200

  • Hardware: 1.0 (EU) / Firmware: 1.3.2

  • Hardware: 1.0 (US) / Firmware: 1.3.6

Hub-Connected Devices

• S200B

  • Hardware: 1.0 (EU) / Firmware: 1.11.0

  • Hardware: 1.0 (US) / Firmware: 1.12.0

• S200D

  • Hardware: 1.0 (EU) / Firmware: 1.11.0

  • Hardware: 1.0 (EU) / Firmware: 1.12.0

• T100

  • Hardware: 1.0 (EU) / Firmware: 1.12.0

• T110

  • Hardware: 1.0 (EU) / Firmware: 1.8.0

  • Hardware: 1.0 (EU) / Firmware: 1.9.0

  • Hardware: 1.0 (US) / Firmware: 1.9.0

• T300

  • Hardware: 1.0 (EU) / Firmware: 1.7.0

• T310

  • Hardware: 1.0 (EU) / Firmware: 1.5.0

  • Hardware: 1.0 (US) / Firmware: 1.5.0

• T315

  • Hardware: 1.0 (EU) / Firmware: 1.7.0

  • Hardware: 1.0 (US) / Firmware: 1.8.0

---

[1] (1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22)

Model requires authentication